利用成像型任意反射面速度干涉仪测量石英中的冲击波速度
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TN247

基金项目:

国家自然科学基金资助项目(10805041)


Shock wave velocity measurement in quartz using an imaging velocity interferometer for any reflector
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在神光Ⅲ原型激光装置上,利用自行研制的成像型任意反射面速度干涉仪(I-VISAR)对石英中冲击波速度进行了测量,获得了清晰的实验信号。实验结果表明,在8路能量为400 J、波长为351 nm的激光注入腔靶时,经过60μm的Al后,石英中的冲击波速度为36.47 km/s。

    Abstract:

    On the Shenguang-Ⅲ prototype high power laser facility,the shock wave velocity in quartz is measured by an imaging velocity interferometers system for any reflector(VISAR) made by oneself and viewdata signals with high quality are acquired.Experimental results indicate that the radiation temperature is about 180 eV in a high z cylindrical hohlraum which is irradiated by eight laser pulses with 400 J energy.Also it indicates that the velocity of the shock wave in quartz is 36.47 km/s after the sh...

    参考文献
    相似文献
    引证文献
引用本文

彭晓世,王峰,唐道润,刘慎业,蒋小华,刘永刚,陈铭,梅雨.利用成像型任意反射面速度干涉仪测量石英中的冲击波速度[J].光电子激光,2011,(9):1401~1404

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码