光开关在分布式光纤温度传感系统的应用研究
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP212.11

基金项目:

国家重点基础研究发展“973”计划资助项目(2010CB327804); 浙江省重大科技专项资助项目(2008C13041-1,2009C11049)


Application research of optical switch in distributed optical fiber temperature sensor system
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分析了决定分布式光纤温度传感器系统传感距离的因素,提出了使用光开关扩展系统的传感长度。设计了多模1×2棱镜光开关的单片机驱动接口,计算机软件通过RS232串行接口发出指令控制光开关的切换。测试结果表明,嵌入了1×2光开关可使系统传感光纤长度延伸为原来的2倍。

    Abstract:

    The working principle,engineering application and development trends of distributed optical fiber temperature sensor are introduced briefly.Factors that determine the length of sensing optical fiber are discussed in particularly.In distributed optical fiber temperature sensor system,the length of sensing optical fiber is determined by power of laser,loss coefficient of optical fiber and signal to noise ratio(SNR) of the system.A method to extend the sensing length of the system is proposed by using optical ...

    参考文献
    相似文献
    引证文献
引用本文

王剑锋.光开关在分布式光纤温度传感系统的应用研究[J].光电子激光,2010,(9):

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码