基于复合晶体的全固态高功率1064nm激光器的实验研究
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TN248.1

基金项目:

国家科技攻关项目


Experimental Research of an All-solid-state High Power 1064 nm Composite Nd:YAG Laser
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了最大输出功率超过500W的全固态连续高功率1064nm激光器。为了改善热效应,选用了扩散键合方法制成的复合Nd:YAG,有效地降低了高功率激光器中的激光晶体热透镜问题。在实验中,1064nm输出镜的透过率分别为T=10%、30%、35%和40%,得到了512W 1064nm输出,光-光转换效率达到32%。

    Abstract:

    The research on an all-solid-state high power laser capable of generating CW power at 1 064 nm that is greater than 500 W is reported. To facilitate thermal management,undoped YAG end caps are diffusion bonded to the central Nd.YAG,and the thermal focal problem is weakened. In the experiment,the transmission rate of the output mirror of 10% ,30%,35%,40% are chosen respectively , and the maximum 512 W output power at 1 064 nm with 32 % optical-optical conversion efficiency is achieved.

    参考文献
    相似文献
    引证文献
引用本文

杨扬,徐德刚,姚建铨,李海峰,王与烨,王鹏.基于复合晶体的全固态高功率1064nm激光器的实验研究[J].光电子激光,2006,(2):171~174

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2005-06-04
  • 最后修改日期:2005-10-03
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码