| 王永洪,刘俊伟,张明义,赵国晓,赵彦平.基于光纤光栅的双壁开口模型管桩测试技术研究[J].光电子激光,2018,29(12):1312~1316 |
| 基于光纤光栅的双壁开口模型管桩测试技术研究 |
| Research on testing technology of double-walled open pipe pile based on FBG |
| 投稿时间：2018-04-19 |
| DOI： |
| 中文关键词: 光纤布拉格光栅 双壁开口 模型管桩 有限元 标定 |
| 英文关键词:fiber Bragg grating double-walled open mode pipe pile finite element calibr ation |
| 基金项目:国家自然科学基金资助(51078196,4,41772318)、山东省重点研发计划(2018GSF117010,7GSF16107)和山东省自然科学基金(ZR2016EEP06)资助项目 (1.青岛理工大学 土木工程学院,山东 青岛 266033； 2.青岛理工大学 蓝色经济区工程建设与安全协同创新中心,山东 青岛 266033) |
|
| 摘要点击次数: 916 |
| 全文下载次数: 0 |
| 中文摘要: |
| 针对光纤光栅传感器在模型管 桩试验应用情况, 提出了一种光纤光栅传感器理论灵敏度系数和实验灵敏度系数应变标定方法。结合理论分析 ,在封装FBG 应变传感器前,对模型管桩内、外管进行有限元Abaqus应力分布模拟分析,得到双壁开口模 型管桩对封装 FBG应变传感器没有影响,提高了实验应变测量精度。对模型管桩封装后的FBG应变传感器进 行标定实验, 每次按200逐级加载后并卸载,循环加载5次,得到内外管FBG传感器 应变灵敏度系数分别为2.15 pm/με、2.24 p m/με,且线性度 均达到0.999以上。该方法简单、易操作,可用于光纤光栅应变传感 器在模型管桩试验前的标定,为光纤光栅传感器在试验和工程中应用奠定了基础。 |
| 英文摘要: |
| In order to measure the pile friction,pile tip resistance and soil re sistance of the open pipe pile during sinking,a double-walled open mode pipe pile with fiber Bragg grating (FBG) sen sor is designed. A fiber grating sensor theoretical sensitivity coefficient and experimental sensitivity coeffici ent strain calibration method is proposed in view of the application of FBG sensors in the model pipe pile test. Combined with the theoretical analysis, the finite element Abaqus stress distribution of the model pipe pile is simulate d and analyzed before the FBG strain sensor is encapsulated. The double-walled open model pipe pile has no influence on the FBG strain sensor and the experimental strain measurement accuracy is improved.The calibration experiment of FBG strain sensor after the model pipe pile encapsulation is carried out by every step loading and unloading of 200με,and it is loaded for 5times.The strain sensitivity coefficients of FBG sensor encapsulated on interna l and external tubes are 2.15pm/με and 2.24pm/με,respectively,with line arity greater than 0.999.At the same time,the method is simple and easy to operate,and is suitable for the calibration of fiber grati ng strain sensor before the model pipe pile test,which lays the foundation for the application of FBG sensors in the e xperiment and engineering. |
| 查看全文 下载PDF阅读器 |
| 关闭 |
|
|
|
|
|