楼伟民,申屠锋营,刘桦楠,王友清,沈常宇.基于长周期光纤光栅和蝶形锥的光纤横向压力传感器[J].光电子激光,2016,27(11):1145~1148
基于长周期光纤光栅和蝶形锥的光纤横向压力传感器
A transverse load optical fiber sensor based on long-period grating and bowkno t-type taper
投稿时间:2016-02-28  
DOI:
中文关键词:  光纤传感  长周期光纤光栅(LPG)  蝶形锥(BTT)  横向压力
英文关键词:optical fiber sensors  long period fiber grating (LPG)  bowknot-type tap er (BTT)  transverse load
基金项目:国家自然科学基金(61405185)资助项目 (中国计量学院 光电子技术研究所,浙江 杭州 310018)
作者单位
楼伟民 中国计量学院 光电子技术研究所,浙江 杭州 310018 
申屠锋营 中国计量学院 光电子技术研究所,浙江 杭州 310018 
刘桦楠 中国计量学院 光电子技术研究所,浙江 杭州 310018 
王友清 中国计量学院 光电子技术研究所,浙江 杭州 310018 
沈常宇 中国计量学院 光电子技术研究所,浙江 杭州 310018 
摘要点击次数: 1142
全文下载次数: 0
中文摘要:
      提出一种基于长周期光纤光栅(LPG)和蝶形锥(BTT)的光纤横向压力传感器。传感器是由LPG 和一 段单模光纤(SMF)熔接而成,其特点是在熔接处会形成一个BTT。实验中,横向压力作 用在LPG上, 干涉谱共振波长强度随横向压力的变化而变化。当横向压力从0.000 增加到1.225N/mm时,传感器的灵敏度 达到-10.476dB/(N/mm),是目前类似传感器灵敏度的2倍左右。本 文传感器具有灵敏度高、成本低和结构简单的优点,具有广阔的应用前景。
英文摘要:
      We present a transverse load sensor based on in-line Mach-Zehnder in terferometer (MZI).The sensor head is formed by a long period fiber grating (LPG) and bowknot-type (BTT) tape r structure through fusion splicing.With the increase of transverse load on the LPG,the couple efficiency between the core mode and the cladding mode of LPG changes,which further brings about a change of the interference fringe visi bility.The experimental results show that the structure with a 3cm-long LPG has the sensitivity of -10.476dB/(N/mm) for the wavelengths of 1562nm,which is about 2times higher than that of the curre nt similar existing transverse load sensor.The sensor has high sensitivity,low cost and simple structure,which can be widel y applied in industry.
查看全文    下载PDF阅读器
关闭

版权所有:《光电子·激光》编辑部  津ICP备12008651号-1
主管单位:天津市教育委员会 主办单位:天津理工大学 地址:中国天津市西青区宾水西道391号
技术支持:北京勤云科技发展有限公司