梁磊,李东旭,仇磊,徐刚.一种基于柔性铰链的FBG加速度传感器[J].光电子激光,2016,27(4):347~352
一种基于柔性铰链的FBG加速度传感器
An FBG acceleration sensor based on flexure hinge
投稿时间:2015-12-02  
DOI:
中文关键词:  柔性铰链  加速度传感器  光纤布拉格光栅(FBG)  数值计算方法  有限元法
英文关键词:flexure hinge  frequency acceleration sensor  fiber Bragg grating (FBG)  numeric al method  finite element method
基金项目:国家“863”项目《采煤机工作可靠性智能监测技术》(2013AA06A411)资助项目 (1.武汉理工大学 光纤传感技术国家工程实验室,湖北 武汉 430070; 2.湖北工程学院 机械工程系,湖北 孝感 432000)
作者单位
梁磊 武汉理工大学 光纤传感技术国家工程实验室,湖北 武汉 430070 
李东旭 武汉理工大学 光纤传感技术国家工程实验室,湖北 武汉 430070 
仇磊 武汉理工大学 光纤传感技术国家工程实验室,湖北 武汉 430070 
徐刚 武汉理工大学 光纤传感技术国家工程实验室,湖北 武汉 430070
湖北工程学院 机械工程系,湖北 孝感 432000 
摘要点击次数: 1006
全文下载次数: 0
中文摘要:
      为了适应光纤传感器在采煤机中的应用,提出了一 种基于柔性铰链的光纤布拉格光栅(FBG)加速度传感 器,其质量块通过柔性铰链和基座连接。基于传感器的结构模型,从理论给出了传感器的 灵敏度和谐振频率公式, 并讨论了结构参数对传感器灵敏度和谐振频率的影响,还利用有限元法分析了传感器的静态 和动态特性。实验表明,本文传感器的谐振频率为2kHz,峰-峰值灵敏度为22pm/g,横向抗干扰度小于10%,适用于1kHz以下加速度的 测量。
英文摘要:
      For the application of optical sensor in shearer,this paper presents a fiber Bragg grating (FBG) acceleration sensor based on a mass block connected with a base by a flexible hinge. According to the structure model of the acceleration sensor,we give the form ula a about the sensitivity and resonance frequency of the sensor and discuss the effects of the structural parameters on the sensitivity and resonance frequency.Also finite element method is used t o analyze the static and dynamic characteristics of the sensor.A series of optic al fiber sensing experimental results show that the resonant frequency of our prepared sensor is 2kHz,the sensitivity is 22pm /g,the transverse interference is less than 10%,so the sensor is suitable for the measurement with acceleration frequency under 1kHz.
查看全文    下载PDF阅读器
关闭

版权所有:《光电子·激光》编辑部  津ICP备12008651号-1
主管单位:天津市教育委员会 主办单位:天津理工大学 地址:中国天津市西青区宾水西道391号
技术支持:北京勤云科技发展有限公司