| 马龙,王丹,张鸿燕,牛一凡,郭彤,雷李华.微结构低重叠度大范围三维拼接方法[J].光电子激光,2015,26(5):910~918 |
| 微结构低重叠度大范围三维拼接方法 |
| A low overlap rate and large scope 3-D stitching method for micro-structures |
| 投稿时间：2015-01-19 |
| DOI： |
| 中文关键词: 微结构 无损检测 大范围 三维拼接 低重叠度 |
| 英文关键词:micro-structure non-destructive detection large scope 3-D stitching low overlap rate |
| 基金项目:国家自然科学基金(51205397,61201085)和中央高校基本科研业务费中国民航大学专项(3122014H004)资助项目 (1.中国民航大学 中欧航空工程师学院,天津 300300; 2.天津大学 精密测试技术及仪 器国家重点实验室,天津 300072; 3.上海计量测试技术研究院纳米测量实验室,上海 201203) |
|
| 摘要点击次数: 916 |
| 全文下载次数: 4 |
| 中文摘要: |
| 针对微结构大范围无损测试问题,提出了一种低 重叠度的三维结构拼接方法。首先基于实验参数将结构特征提 取区域限制在测量过程中的重叠区域,以减少误匹配出现的可能性并提高计算效率；在上述 区域内,通过SIFT(scale-invariant feature transform)算法进行特征 点提取；在特征点匹配阶段,根据测量系统参数进一步提出缩小匹配点对搜索范围的方法以 提高特征点匹配可靠性；最后以 重叠区域的局部连续性为依据,计算校正矩阵以校正测量过程中环境扰动带来的拼接结构错 动。实验中,将本方法与目前商业设 备的拼接测量功能进行了对比。实验表明,本文方法不但适用于特征丰富的结构,也适用于 相似度高的阵列性结构,可在重叠度为6%时实现有效拼接。 |
| 英文摘要: |
| In order to achieve the large scope evaluation for micro-structures, a low overlap rate and large scope 3-D structure stitching method is presented in this paper.According to the features of micro -structures,the area for the feature points extraction is designated in the overlap region in the first step based on the experiment al configuration,in order to reduce the possibility of incorrect matching and increase the processing efficiency.Inside this special s ector,the feature points are extracted through SIFT algorithm.During the feature points matching process,the matched points search ing area is optimized based on the testing profiler parameters in order to increase the matching reliability.According to the local continuity inside the overlap region,the mismatch between the stitched structures due to the environmental disturbance during the test is corrected by a correction matrix in the last step. The comparison experiments between the proposed method and a commercial profiler are carried out,which show that the new algorithm is not only eff ective for the structure with rich features,but also applicable for the array st ructures with unobvious features.The further experiment shows that the stitching could be successfully achieved at overlap rate of 6%. |
| 查看全文 下载PDF阅读器 |
| 关闭 |
|
|
|
|
|