郭洪,梁赪,花修春,马海生,郭文锋,敬承斌,褚君浩.全反射氧化锗空芯光纤弹性弯曲半径的计算与验证[J].光电子激光,2015,26(2):392~396 |
全反射氧化锗空芯光纤弹性弯曲半径的计算与验证 |
Elastic bending radius calculation of metallic attenuated total reflection GeO2hollow optical fibers |
投稿时间:2014-06-09 |
DOI: |
中文关键词: 弹性弯曲半径 金属毛细管空芯光纤 衰减全反射 弹性形变 理论计算 |
英文关键词:elastic bending radius metallic hollow optical fiber attenuated total reflecti on(ATR) elastic deformation theoretical calculation |
基金项目:国家自然科学基金(61275100,50802046)资助项目 (1.华东师范大学 信息科学技术学院极化材料与器件教育部重点实验室,上海 200241; 2.燕山大学 环境 与化工工程学院,应用化学河北省重点实验室,河北 秦皇岛 066004; 3.中国科学院上海技术物理研究所,红外物理国家重点实验室,上海 200083) |
作者 | 单位 | 郭洪 | 华东师范大学 信息科学技术学院极化材料与器件教育部重点实验室,上海 200241 | 梁赪 | 华东师范大学 信息科学技术学院极化材料与器件教育部重点实验室,上海 200241 | 花修春 | 华东师范大学 信息科学技术学院极化材料与器件教育部重点实验室,上海 200241 | 马海生 | 燕山大学 环境 与化工工程学院,应用化学河北省重点实验室,河北 秦皇岛 066004 | 郭文锋 | 燕山大学 环境 与化工工程学院,应用化学河北省重点实验室,河北 秦皇岛 066004 | 敬承斌 | 华东师范大学 信息科学技术学院极化材料与器件教育部重点实验室,上海 200241 | 褚君浩 | 华东师范大学 信息科学技术学院极化材料与器件教育部重点实验室,上海 200241 中国科学院 上海 技术物理研究所,红外物理国家重点实验室,上海 200083 |
|
摘要点击次数: 1063 |
全文下载次数: 77 |
中文摘要: |
金属的塑性形变特性使金属毛细管空芯光纤在激 光传输过程中容易产生不可逆塑性形变,依据金属 管材的弹塑性弯曲理论和液相沉积金属毛细管氧化锗(GeO2)空芯光纤的工艺要求, 本文对铍铜和不锈钢毛细管GeO2全反射空芯光纤的弹性弯曲半径进行了计算并通过实验验证。结果表明,铍铜和不锈钢 空芯光纤的最小弹性弯曲半径的计算值与实验值相吻合。 |
英文摘要: |
A metallic attenuated total reflection GeO2hollow optical fiber can be very r obust for transmitting a CO2laser beam because of high toughness and high thermal dissi pation ability of the metal tube.However,the plastic deformation behavior of a metal may cause i rreversible (plastic) deformations as the metallic hollow optical fiber is used to deliver a laser beam. To avoid this,it is necessary to obtain the elastic bending radius of a metalli c hollow fiber and maintain the fiber under an elastic bending condition in practical applicati ons.This work aims to study the elastic bending radius of a metallic GeO2hollow fiber.The e lastic bending radii are calculated based on the elastic-plastic bending theory of a metal pi pe and the fabrication process parameters of stainless steel or beryllium copper GeO2hol low fibers.Then, the calculated radii were experimentally investigated.The stainless steel hollo w fiber (internal diameter is 1.4mm,wall thickness is 0.025mm) exhibits elastic bending behav ior when the yield strain is below 0.29%,and the minimum elastic bending radius reaches 249.61mm. The beryllium copper hollow fiber (internal diameter is 1.4mm,and wall thickness is 0.05mm) is elastically bendable as the yield strain is lower than 0.375%,and the minimum elastic bending radius is 199.58mm. The calculated minimal elastic bending radii agree with the measured values of t he stainless steel or beryllium copper hollow optical fibers. |
查看全文 下载PDF阅读器 |
关闭 |
|
|
|
|
|