韩旭,许睿,王淑莹,章海军.基于双激光束的微型光热驱动器研究[J].光电子激光,2015,26(1):43~47
基于双激光束的微型光热驱动器研究
Method of optothermal microactuator based on dual laser beams
投稿时间:2014-10-03  
DOI:
中文关键词:  双激光束  光热偏转量  微型光热驱动器(OTMA)  光热膨胀
英文关键词:dual laser beams  optothermal deflection  optothermal microactuator (OTMA)  photothermal expansion
基金项目:国家自然科学基金(51077117)资助项目 (浙江大学 现代光学仪器国家重点实验室,浙江 杭州 310027)
作者单位
韩旭 浙江大学 现代光学仪器国家重点实验室,浙江 杭州 310027 
许睿 浙江大学 现代光学仪器国家重点实验室,浙江 杭州 310027 
王淑莹 浙江大学 现代光学仪器国家重点实验室,浙江 杭州 310027 
章海军 浙江大学 现代光学仪器国家重点实验室,浙江 杭州 310027 
摘要点击次数: 1348
全文下载次数: 63
中文摘要:
      实现了一种利用双激光束(双光斑)的微型光热 驱动的器(OTMA)。利用准分子激光微加 工系统加工制作了膨胀臂宽为100μm、总长为750μm的非对称型OTMA;利用 波长650nm的双激光束开展了OTMA的光热驱动实验研究,借助CCD显 微视频运动测量系统,测 定了光热偏转量与激光功率之间的关系曲线。实验结果表明,OTMA的光热偏转量与激光总功 率之 间近似成线性关系;当双光斑功率为4mW时,OTMA获得的光热偏转量达到15.2μm,大于单光 斑分别照射时的偏转量之和(13.1μm);同时,当双光斑照射与单 光斑照射获得的光热偏转量相 同时,双光斑的功率密度仅为单光斑的1/2甚至更小,从而可有效地避免单光斑照射时因 局部温升 过高而导致OTMA烧结损坏,延长了器件的工作寿命。本文的OTMA结构简 单,易于加工,偏转量大,易于操作,并且可以实现无线远距离控制;可望在微纳米技术及 微型光机电系统等领域获得广泛应用。
英文摘要:
      This paper proposes a novel method of optothermal microactuating based on dual laser beams (spots).An optothermal microactuator (OTMA) with a 100μm-width expansio n arm and 750μm-length is designed and manufactured by using an excimer laser micro machining system.Experiments are carried out on the OTMA using dual laser beams with 650n m wavelength,which are monitored by the CCD microscopic system.The results show that the deflection-power curves exhibit approximate linear relationship between the opt othermal deflection of OTMA and the power of laser spots.Furthermore,when the total power is 4mW,the optothermal defletion caused by dual laser spots reaches 15.2μm,larger than the sum (13.1μm) of those individually caused by the left and right laser spots.Meanwhile,as the power density of dual spots is only half of that of single spot when obtaining the same deflection,this method can effectively avoid burning-out and damage of OTMA,and thus OTMA′s working lifetime can be significantly exten ded. The method of optothermal microactuating is of the advantages of simple structur e,easy fabrication,large displacement,convenience for operation,and enables wireless and remote control.It has high potential of being widely applied in the fields of micro/na no-technology and micro-opto-electro-mechanical systems.
查看全文    下载PDF阅读器
关闭

版权所有:《光电子·激光》编辑部  津ICP备12008651号-1
主管单位:天津市教育委员会 主办单位:天津理工大学 地址:中国天津市西青区宾水西道391号
技术支持:北京勤云科技发展有限公司