周灿林,刘业鹏,司书春,刘同川,杨允鑫.一种适合低信噪比投影栅的时空二维相移算法[J].光电子激光,2014,(7):1389~1394 |
一种适合低信噪比投影栅的时空二维相移算法 |
A spatiotemporal phase-shifting profilometry applied for the low sig nal-noise ratio projection |
投稿时间:2013-12-15 |
DOI: |
中文关键词: 抽样云纹法 相位测量轮廓术(PMP) 四步相移法 莫尔条纹 相位去包裹 插值 |
英文关键词:sampling Moire method phase measuring profilometry (PMP) four-step phase-shifting algorithm Moire fringe phase unwrapping interpolation |
基金项目:山东省科技攻关(2007GG30004010,2011GG X10125)资助项目 (山东大学物理学院,山东 济南 250100) |
|
摘要点击次数: 1891 |
全文下载次数: 134 |
中文摘要: |
提出了一种适合低信噪比投影栅的时空二维相移算 法。首先设计四步相移 正弦光栅条纹图,由DLP投影仪投影到待测物体表面,再由CCD相机采集受物体形貌调制 的变形条纹图;然后对其中一幅变形条纹图进行傅里叶变换以确定抽样间隔,再对4幅相移 条 纹图用相移法求得条纹背景和调制幅度后,对每幅变形条纹图做归一化处理;对每幅相 移条纹图在空间域进行下采样抽样和灰度插值,构建相移莫尔条纹图,得到多帧时空域相移 条纹图;对多帧时空域相移条纹图按时空二维相移法处理求得莫尔相位,再将莫尔相 位与抽样点相位叠加求和得到变形条纹图对应的相位数据;最后,以面膜作为样品进行了 实验测量,结果表明,经典四步相移法重构的物体形貌出现明显失真,而本文方法能较好恢 复物体的三维形貌。 |
英文摘要: |
A spatiotemporal phase-shifting profilometry is proposed in order to solve the problem of phase demodulation error for the low signal-noise ratio (SNR) fringe project ion in three-dimensional(3D) shape measurement.Firstly,four-step phase-shiftin g sinusoidal patterns designed by computer are projected onto the tested object by a digital-light-process (DLP) projector and the deformed fringe patterns are acquired by a CCD camera.The sampling pitch is determined by the Fourier tr ansform method.Normalized fringe patterns are obtained after the amplitude and backgrou nd intensities are determined by the phase-shifted method.Then multi-frame spatiotemporal phase-shifting Moire fringes are attained by the process of down-sampling with a sampling pitch and intensity interpolation in space domain for each four-step phase-shifted fringe image.Thus,the phase distribution of the Moire patterns can be calculated using two-dimensional spatiotemporal phase-shifting method.The phase distribution of the original deformed grating can be obtained b y adding the phase of the sampling point to that of the Moire pattern.Finally,the experiment for the facial mask is performed by fringe projection to verify the effectiveness of the proposed method.The results show that the reconstructed 3D shape shows visible distortion with the standard four-step phase-shif ting algorithm but remains fidelity with the proposed algorithm instead. |
查看全文 下载PDF阅读器 |
关闭 |
|
|
|
|
|