甘宏波,陈哲,张军,何小莉,甘焕标,谢俊辛,唐洁媛,罗云瀚,余健辉.侧边抛磨多模光纤中光功率传输特性研究[J].光电子激光,2014,(3):447~453
侧边抛磨多模光纤中光功率传输特性研究
Investigations of optical power transmitting characteristics in side-polished m ultimode fiber
投稿时间:2013-09-06  
DOI:
中文关键词:  侧边抛磨光纤(SPF)  多模光纤(MMF)  光功率  剩余半径  折射率
英文关键词:side polished fiber (SPF)  multimode fiber (MMF)  optical power  remianing radiu s  refractive index
基金项目:国家自然科学基金(61177075,6,61008057)、广东省战略性新兴产业核心技术攻关(2012A032300016)、中央高校基本科研业务费专项资金(11612437;11613405)和广东高校优 秀青年创新人才培养计划(LYM10024)资助项目 (1.暨南大学 理工学院 光电工程系,广东 广州 510632; 2.暨南大学 光电信息与传感技 术广东普通高校重点实验室,广东 广州 510632)
作者单位
甘宏波 暨南大学 理工学院 光电工程系,广东 广州 510632 
陈哲 暨南大学 理工学院 光电工程系,广东 广州 510632 
张军 暨南大学 理工学院 光电工程系,广东 广州 510632 
何小莉 暨南大学 理工学院 光电工程系,广东 广州 510632 
甘焕标 暨南大学 理工学院 光电工程系,广东 广州 510632 
谢俊辛 暨南大学 理工学院 光电工程系,广东 广州 510632 
唐洁媛 暨南大学 理工学院 光电工程系,广东 广州 510632 
罗云瀚 暨南大学 理工学院 光电工程系,广东 广州 510632 
余健辉 暨南大学 理工学院 光电工程系,广东 广州 510632 
摘要点击次数: 1876
全文下载次数: 207
中文摘要:
      侧边抛磨多模光纤(SPMMF)与侧边抛磨单模光纤(SP SMF)相比,具有工艺上容易实现的优势。为了研制SPMMF传感器,分析SPMMF中光功率传输特 性,首先利用有限差分 光束传输法(BPM)模拟计算了不同剩余半径SPMMF中的光强、模场分布以及光纤中传输光 功率与抛磨区覆盖材料折射率的关系,并进行了实验验证。实验结果与模拟结果相互吻合: 当抛磨区覆盖 材料折射率小于1.440时,光功率透过率接近在空气中的透过率;当 覆盖材料的折射率逐渐增大到1.458时, 光功率透过率减小到最小值,且最小值不小于0.001;当覆盖材料的 折射率大于1.458时,光功率透过率由最 小值逐渐增大,最终维持在一个相对稳定的值;不同剩余半径的SPMMF中的传输光功率透过 率不同,剩余半径越小,SPMMF中传输光功率透过率越小。
英文摘要:
      So SPMMF is easier to be implimented t echanically compared with the side polished singlemode fiber. To develop side polished multimode fiber (SPMMF) sensor,the optical power transmitting characteristics in SPMMF are analyzed.First we utilize BPM to simul ate and calculate the distribution of light intensity and mode field in SPMMF with different remaining radii,and the relation between the transmitted light power in fiber and the index of refraction of cover material i n polished area is derived as well.furthermore,we demonstrate our conclution wit h experiment.The results show that when the index of refraction of cover materia l in polished area is smaller than 1.44,the transmittance of light power in fiber is close to the transmittance in air; When the index of refraction of cover material in polished area increases to 1.458,the transmittance decreases to the minimum,and the minimum is not less than 0.001;When the index of refraction of cover material in polished area is lager than 1.458,the transmittance increases slowly and remains at a relatively stabl e value.The transmittance of the transmitted light power in SPMF will be affected by remaini ng radius.We conclute that the transmittance of the transmitted light power in SPMF is smaller as the remaining radius is smaller.
查看全文    下载PDF阅读器
关闭

版权所有:《光电子·激光》编辑部  津ICP备12008651号-1
主管单位:天津市教育委员会 主办单位:天津理工大学 地址:中国天津市西青区宾水西道391号
技术支持:北京勤云科技发展有限公司